ZBL-U5 SERIES MULTICHANNEL ULTRASONIC PILE INTEGRITY TESTER is the perfect device for cross-hole acoustic wave transmission
method. This instrument is specifically designed for testing the pile foundation integrity by using acousti.
The Multichannel Ultrasonic Pile Integrity Tester is designed for sound wave transmission to detect pile integrity; Structural Concrete Compressive Strength, Crack Depth and Defect Detection; Continuous wall integrity testing; geological prospecting, rock integrity, weathering evaluation test; Rock, concrete and other non-metallic materials, mechanical properties testing.
The quality Stems from the professional:
- Professional R&D team
- Production department
- After layers of quality inspection
- Users at ease choice
- CROSS-HOLE ACOUSTIC WAVE TRANSMISSION METHOD
- TEST THE PILE FOUNDATION INTEGRITY
- WATERPROOF
- DUSTPROOF
- WIRELESS DESIGN
- HIGH PERFORMANCE MASTER PROCESSING UNIT
- THREE YEARS HOST WARRANTY
FEATURES
COMPLETE SIX SECTIONS OF THE TEST :- A pile test only once, can be measured 60 meters per minute
WATERPROOF AND DUSTPROOF :- Depth recording wheel with non-contact waterproof design
WIRELESS CONNECTIONS :- Host and record the depth wheel using a wireless connection, get rid of the cable winding, damaged troubles
HIGH PERFORMANCE MASTER PROCESSING UNIT :- Using high- performance A8+DSP master processing unit, with 10.4 British industry bright wide temperature LCD screen
THE TRANSDUCER BOBBIN IS DESIGNED WITH A COLLECTING RING :- Can be free to send and receive signal cable at any time, no longer break the cable
THE FIRST WAVE OF ADVANCED POSITIONING ALGORITHM :- The first wave of accurate positioning, a substantial increase in the accuracy of sound parameters interpretation of the scene, real-time reduction of pile
EVERYTHING OK STRUCTURE DETECTION :- Can be ultrasonic- rebound integrated method of strength testing, non- compacted area and cavity detection, crack depth detection and other structural testing
BEAUTIFUL APPEARANCE :- The use of modern industrial design, double injection molding machine shell, the body anti-skid, anti-fall, strong and beautiful
SPECIFICATION
HOST
- Channels: 4
- Number of tested profiles per time: 6
- Control mode: Built in A8 industrial control board
- Screen: 10.4 inches high definition LCD screen
- Operating method: Touch screen
- Storage method: built-in electronic hard disk (≥4GB) + U disk capacity
- Acquisition mode: Synchronous continuous mining
- Sampling interval: 0.05μs~1638.4μs adjustable
- Acoustic transit time accuracy: 0.05μs
- Record length: 512~4096
- Acoustic transit time range: ±1677.7ms
- Emission voltage (V): 65、250、500、1000 V adjustable
- Amplifier gain: 82dB
- Dynamic range: 154dB
- Amplifier gain accuracy: 0.5dB
- Band width (12dB): 2~500kHz
- Receiver sensitivity: ≤10μV
- Channels interference: ≤1/400
- Transmission port: USB、MiniUsb、WiFi、Bluetooth
- Measuring method: Horizontal test, inclined test, retest, finer increment test
- Power(Built-in): lithium battery
- Power(Outside): 220V AC/DC
- Work time(h): >8
- Work environment(Temperature): -10°C~+40°C
- Work environment(Humidity): <90%RH
- Size: 270mm x 220mm x 75mm
- Weight: 2.5kg
- Lifting device connection mode: wireless
WIRELESS LIFTING DEVICE
- Maximum transmission distance: ≥10m
- Resolution: 1cm
- Work time(h): ≥20
- Power: Built-in lithium battery
- Record interval: 2cm~25cm adjustable
- Lifting speed: >60m/min (5 test points per meter)